China supplier Industrial Pump /Petroleum CZPT Parts/Connecting Rod wholesaler

Merchandise Description

industrial pump /petroleum CZPT parts/connecting rod 

Solution Software

1 Composition Characteristics
1.1 Power Finish Characteristics

a) The Frame The body is made of welded metal plate and tension reduction treated to receive the good rigidity and substantial power. The place the place the crankshaft bearing is fitted is strengthened by utilizing ribbed plates. The frame is furnished with the necessary oil basin and oil way system for 

cooling and lubricating goal.
b) The Pinion Shaft The pinion shaft is made of cast alloy metal on which a herringbone equipment with the medium-challenging tooth surface area is machined. For simple servicing, the solitary row radial prolonged cylindrical roller bearing with internal ring(with out sides) is utilised. The both finishes of the pinion shaft lengthen out, so that the sheave or the sprocket CZPT mounted on both conclude.
c) The Crankshaft The crankshaft is produced of forged alloy steel and furnished with herringbone equipment, connecting rod and bearing. The tooth form of the big-geared ring is herringbone equipment. The gear bore and the crankshaft surfaces are interference equipped and they are the two mounted with bolts and lock nuts. The massive finish of the connecting rod is mounted on 3 eccentric straps of the crankshaft via solitary row short cylindrical roller bearings and the little stop on the crosshead pin by means of double row extended cylindrical roller bearing. Double row radial spherical roller bearings are mounted at each ends of the crankshaft.
d) The Crosshead And Crosshead Xihu (West Lake) Dis. The crosshead and crosshead CZPT are manufactured of homebred meehanite solid iron featured by good abrasion resistance and lengthy support daily life. Higher and lower guides are utilized for mud pump, so that the concentricity CZPT altered by including shims beneath the decrease manual. The relationship amongst the crosshead and the extension rod is made by making use of bolted flange. The rigid connection ensures the concentricity of the crosshead and the extension rod. The CZPT is utilized for connecting the extension rod to the piston rod. The light-weight-excess weight CZPT enables the extension rod and the piston rod to join to each other easily and reliably.
e) The Extension Rod Packing The extension rod packing is duplex seal composition to give the great seal consequence.
f) The Electricity End The electricity finish employs the merged lubricating program of forced lubrication and splash lubrication.
one.2 Fluid End Attributes
a) Cylinders Cylinders are manufactured of forged alloy steel, 3 cylinders of every pump are interchangeable. Valve-over-valve (through sort cylinder) design and style minimizes the cylinder volume and encourages the volumetric performance. At consumers ask for, the cylinder area could be nickel plated to enhance the abrasion resistance.
b) Discharge pulsation dampener, shear reduction valve and discharge strainer are furnished at the outlet. F-1300 and F-1600 pump suction inlet is furnished with Φ305 flange.
c) Valve Assembly The suction valve and the discharge valve for F-1300 and F-1600 mud pumps are interchangeable. 
F-1300 and F-1600 mud pump employs API 7#valve pots.
d) Liners Bi-steel liners are utilised. The sleeve is manufactured of put on-resistant cast iron, the floor hardness is HRC60~sixty five. As a result, liners function use resistance, corrosion resistance and high area finish. Liners are put in from the liner chamber in the entrance of the body and set with liner thread ring , liner lock ,bolt and wear plate when setting up.
e) Pistons And Piston Rods They are slide fitted, sealed with rubber seal ring and ultimately fastened with lock nuts to avoid the piston from looseness and to perform a role in sealing. Cylinders, liners, pistons, valves, valve seats, valve springs, seal rings, valve pot handles, thread rings and cylinder heads at the fluid end of F-1300 and F-1600 mud pumps are all interchangeable.
f) Spraying Method The spraying technique is made up primarily of spray pump, CZPT water box, and spray pipe, the function is to great and rinse liners and pistons to encourage their support daily life. The centrifugal spray pump CZPT pushed by a sheave mounted on the enter shaft extension conclude or a separate motor and cooled and lubricated by h2o. The sturdy set spray CZPT is utilised. The spray CZPT is mounted on the liner conclude protect and the frame. Nozzle is confront to the piston stop so that the lubricatingcooling fluid can rinse the make contact with surface area among the piston and liner all the time.
g) Lubricating System The electricity end utilizes the blended lubricating system of Charles Rig Provides, Inc. forced lubrication and splash lubrication. The strain oil is conveyed by means of lubricating pipeline, crosshead, extension rod, crosshead CZPT and all bearings by a gear oil pump inside the oil box to recognize the pressured lubrication. The operating condition of the gear oil pump could be understood from the force gauge behind the frame.
h) Charging System To avoid the air lock taking place for minimal pump inlet pressure, every mud pump should be furnished with a complete charging method. It is composed of charging pump,pump foundation, butterfly valve and corresponding manifold. Mounted on the suction manifold of the mud pump, the charging pump is pushed by the unique goal motor or the input shaft of the mud pump through V-belts to lessen the electricity use.

Firm profile

Hebel Xihu (West Lake) Dis.fa Petroleum CZPT Co. LTD was recognized in 2006,with 5000m2 plant.The organization focuses on R&D of mud pump fittings and many R&D outcomes have been horned with awards as effectively as patented for creation. The organization is engaged in merchandise design and style, producing and support on all the quality oilfield substitution parts, like mud pump fluid stop areas which includes Fluid stop modules, liners, pistons, valves,&seats, extension rods, piston rods, valve addresses and many others. 
The company retains a professional technological staff and is geared up with advanced machineries,improving the specialized capabilities and updating item quality,
Our goods are licensed by ISO9001 good quality management. We offer goods not only our oilfields organization of domestic, but also dozens of nations all more than the entire world, this sort of as Usa, Canada, Indonesia and Iran. With a number of years’ persistence, we are commonly acknowledged as a professional provider of higher quality mud pump cylinder liners and other elements in fluid end modules

other items:

 

The recommended components for the worm are hardened metal and bronze for the worm gear. Nonetheless, relying on the software, unhardened metal worms can run sufficiently and more economically on cast iron worm gears rated at 50%. In addition to steel and hardened metal, worms are available in stainless steel, aluminum, bronze, and nylon worm gears are available in steel, hardened steel, stainless steel, aluminum, nylon, and non-metallic (phenolic).

China supplier Industrial Pump /Petroleum CZPT Parts/Connecting Rod     wholesaler

Tags:

Herringbone Gears

As one of the leading herringbone gears manufacturers, suppliers, and exporters of mechanical products, We offer herringbone gears and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of herringbone gears.

Recent Posts