China Professional Petro CZPT Connecting Rod with Free Design Custom

Merchandise Description

petro CZPT connecting rod 

Product Software

1 Framework Functions
1.1 Electrical power Stop Functions

a) The Frame The body is manufactured of welded metal plate and pressure relief dealt with to acquire the very good rigidity and large strength. The area where the crankshaft bearing is equipped is strengthened by employing ribbed plates. The frame is furnished with the needed oil basin and oil way program for 

cooling and lubricating objective.
b) The Pinion Shaft The pinion shaft is manufactured of solid alloy metal on which a herringbone gear with the medium-hard tooth surface area is machined. For straightforward servicing, the single row radial long cylindrical roller bearing with internal ring(with out sides) is utilized. The both ends of the pinion shaft extend out, so that the sheave or the sprocket CZPT mounted on possibly stop.
c) The Crankshaft The crankshaft is created of forged alloy metal and furnished with herringbone equipment, connecting rod and bearing. The tooth sort of the big-geared ring is herringbone gear. The equipment bore and the crankshaft surfaces are interference equipped and they are each fixed with bolts and lock nuts. The large stop of the connecting rod is mounted on 3 eccentric straps of the crankshaft through single row brief cylindrical roller bearings and the modest conclude on the crosshead pin by means of double row long cylindrical roller bearing. Double row radial spherical roller bearings are mounted at the two ends of the crankshaft.
d) The Crosshead And Crosshead Xihu (West Lake) Dis. The crosshead and crosshead CZPT are created of homebred meehanite solid iron showcased by good abrasion resistance and long provider lifestyle. Upper and decrease guides are utilised for mud pump, so that the concentricity CZPT adjusted by including shims beneath the decrease guide. The relationship in between the crosshead and the extension rod is produced by using bolted flange. The rigid connection makes certain the concentricity of the crosshead and the extension rod. The CZPT is used for connecting the extension rod to the piston rod. The mild-weight CZPT enables the extension rod and the piston rod to connect to each other easily and reliably.
e) The Extension Rod Packing The extension rod packing is duplex seal composition to give the good seal end result.
f) The Electricity Stop The power finish makes use of the blended lubricating program of compelled lubrication and splash lubrication.
one.2 Fluid Finish Attributes
a) Cylinders Cylinders are created of solid alloy metal, 3 cylinders of every single pump are interchangeable. Valve-in excess of-valve (through sort cylinder) layout reduces the cylinder volume and encourages the volumetric effectiveness. At clients ask for, the cylinder surface could be nickel plated to improve the abrasion resistance.
b) Discharge pulsation dampener, shear reduction valve and discharge strainer are furnished at the outlet. F-1300 and F-1600 pump suction inlet is furnished with Φ305 flange.
c) Valve Assembly The suction valve and the discharge valve for F-1300 and F-1600 mud pumps are interchangeable. 
F-1300 and F-1600 mud pump uses API 7#valve pots.
d) Liners Bi-steel liners are used. The sleeve is made of put on-resistant forged iron, the floor hardness is HRC60~sixty five. As a result, liners feature use resistance, corrosion resistance and high surface complete. Liners are place in from the liner chamber in the entrance of the frame and fastened with liner thread ring , liner lock ,bolt and use plate when installing.
e) Pistons And Piston Rods They are slide fitted, sealed with rubber seal ring and last but not least mounted with lock nuts to prevent the piston from looseness and to play a role in sealing. Cylinders, liners, pistons, valves, valve seats, valve springs, seal rings, valve pot covers, thread rings and cylinder heads at the fluid end of F-1300 and F-1600 mud pumps are all interchangeable.
f) Spraying Technique The spraying technique is composed mostly of spray pump, CZPT drinking water box, and spray pipe, the perform is to amazing and rinse liners and pistons to market their provider lifestyle. The centrifugal spray pump CZPT pushed by a sheave mounted on the enter shaft extension end or a separate motor and cooled and lubricated by water. The tough mounted spray CZPT is used. The spray CZPT is mounted on the liner end protect and the frame. Nozzle is face to the piston end so that the lubricatingcooling fluid can rinse the get in touch with surface among the piston and liner all the time.
g) Lubricating System The electricity end makes use of the combined lubricating method of Charles Rig Materials, Inc. pressured lubrication and splash lubrication. The strain oil is conveyed by way of lubricating pipeline, crosshead, extension rod, crosshead CZPT and all bearings by a gear oil pump inside the oil box to comprehend the pressured lubrication. The working issue of the equipment oil pump could be understood from the pressure gauge driving the body.
h) Charging Program To stop the air lock happening for low pump inlet stress, each and every mud pump need to be furnished with a complete charging system. It consists of charging pump,pump base, butterfly valve and corresponding manifold. Mounted on the suction manifold of the mud pump, the charging pump is driven by the special objective motor or the input shaft of the mud pump through V-belts to reduce the energy use.

Organization profile

Hebel Xihu (West Lake) Dis.fa Petroleum CZPT Co. LTD was proven in 2006,with 5000m2 plant.The company focuses on R&D of mud pump fittings and numerous R&D benefits had been horned with awards as well as patented for creation. The organization is engaged in product design, production and support on all the top quality oilfield alternative elements, such as mud pump fluid finish areas including Fluid conclude modules, liners, pistons, valves,&seats, extension rods, piston rods, valve covers and so on. 
The company retains a professional technical crew and is equipped with advanced machineries,improving the technological skills and updating solution high quality,
Our merchandise are accredited by ISO9001 good quality management. We offer goods not only our oilfields organization of domestic, but also dozens of countries all more than the globe, this kind of as United states of america, Canada, Indonesia and Iran. With numerous years’ persistence, we are commonly accepted as a professional supplier of large quality mud pump cylinder liners and other elements in fluid end modules

other products:

contact:

Sophia (Ms,)
Overseas Company Dept
ZheZheJiang nhuafa petroleum CZPT Co.,LTD.
 
     
T/F:-311-83953682
Include:Chang’an District,HangZhou,ZheJiang ,China
 

Worm gears are appropriate angle drives that supply massive gear ratios with comparatively quick heart-to-centre distances from 1/4″ to 11″. When appropriately put in and lubricated, they serve as the quietest, smoothest-working gear variety. Because worm equipment drives can obtain substantial gear ratios, highest reduction can be accomplished in a smaller sized room than many other varieties of gear drives. The worm and worm equipment operate at a 90° angle on non-intersecting axes.

China Professional Petro CZPT Connecting Rod     with Free Design Custom

Tags:

Herringbone Gears

As one of the leading herringbone gears manufacturers, suppliers, and exporters of mechanical products, We offer herringbone gears and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of herringbone gears.

Recent Posts